Type LCD projector Model XL7100U Display technology
0.8-inch LCD panel: 3 pieces (for R,G,B) Pixel: 1024 x 768 = 786432 pixels Total 2359296 pixels Active pixel rate: 99.99% or more (each panel)
Projection lens F 1.8 - 2.6 f= 24.0 - 43.2 mm Light-source lamp 350 W,Image size (projection distance) 40” min. to 300” max. (projection distance 1.2 to 9.1 m)
Maximum resolution Computer signal,Maximum resolution: 1920 x 1200 dots (compressed),Panel resolution: 1024 x 768 dots
Video signal NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60,Component signal,480i, 480p, 576i, 576p, 720p, 1080i, 1080p,Panel resolution: 1024 x 768 dots
Computer/component video input [Signal type] [Terminal type] [Line],Analog RGB Mini D-SUB 15-pin 1,Analog RGB 5 BNC 1,Digital RGB DVI-D 24-pin 1
Video input [Signal type] [Terminal type] [Line],Video input BNC 1,S-video input S 1,Audio input [Signal type] [Terminal type] [Line]
RGB/Component Stereo mini jack (ø3.5) 2,Digital RGB Stereo mini jack (ø3.5) 1.Video RCA (L, R) 1.S-video RCA (L, R) 1.
HDMI input [Signal type] [Terminal type] [Line],HDMI HDMI 19-pin 1
Monitor output [Signal type] [Terminal type] [Line],Analog RGB Mini D-SUB 15-pin 1,Audio output [Signal type] [Terminal type] [Line],RGB/Component Stereo mini jack (ø3.5) 1
Speaker 10 W Mono Round type x 1,Control terminal/others RS-232C (D-SUB 9-pin), LAN (RJ-45), REMOTE IN/OUT (Stereo mini jack (ø3.5))
Operating temperatures +41°F (+5°C) to +104°F (+40°C): ( Standard altitude mode: All projection angles),+41°F (+5°C) to +86°F (+30°C): (High altitude mode: Floor installation/ceiling installation)
Rated voltage AC 100 - 240 V, 50/60 Hz,Power consumption 5.7 A, 560 W
During standby:AC 100 - 120 V: 5 W (when STANDBY MODE is STANDARD),1.8 W (when STANDBY MODE is LAN),0.2 W (when STANDBY MODE is LOW)
AC 220 - 240 V: 5 W (when STANDBY MODE is STANDARD),1.8 W (when STANDBY MODE is LAN),0.3 W (when STANDBY MODE is LOW)
Dimensions (not including protrusion) 481 mm (W) x 179 mm (H) x 418 mm (D) (projector only),481 mm (W) x 179 mm (H) x 502 mm (D) (including the terminal cover)
Weight 10.0 kg (projector only), 10.5 kg (including the terminal cover)
Others S-video input Luminance signal: Vp-p=1.0 V 75 Ω (negative sync),Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
Video input Vp-p=1.0 V 75 Ω (negative sync),Component video input YCBCR: Vp-p=1.0 V 75 Ω (Y) (negative sync),Vp-p=0.7 V 75 Ω (CB, CR)
Analog input RGB: Vp-p=0.7 V 75 Ω (negative sync),YCBCR: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (CB, CR),HD/CS: TTL-level (negative or positive polarity)
VD: TTL-level (negative or positive polarity),Digital input (DVI),DVI-D interface (TMDS single link) with HDCP,Digital input (HDMI)
HDMI interface (TMDS single link) (Only PCM audio is supported.),Audio input 350 mVrms, 10 kΩ or more